A dual-band Wi-Fi connection with a combined speed of up to 1.9Gbps is provided by the TP-Link RE580D AC1900 Range Extender Setup, which operates on the 802.11ac Wi-Fi standard. You can rely on the RE580D to provide reliable connections for bandwidth-intensive tasks such as HD/4K video streaming and large file downloads because of its exceptional speed. Because it can communicate over both the 5GHz and 2.4GHz bands, the TP-Link RE850D AC1900 Range Extender is capable of creating a single, lightning-fast connection by transmitting information over one channel and receiving information over the other. Additionally, beamforming technology directs Wi-Fi traffic in the direction of your connected devices, concentrating signal strength where it is most needed. In addition to increasing the range of Wi-Fi connections, higher ranking bandwidth utilization ensures that they are focused and well organized.
Range Extender with Web Domain Configuration for the TP-Link RE580D
- First and foremost, the TP-Link RE5800 AC1900 Range extender setup must be unpacked.
- After that, connect the antennas to the extender and point the extender in the appropriate direction.
- Confirm that the internet signals stable; if the signals not stable, try to get them to become more stable.
- After that, unplug the modem and reconnect the power adapter, ensuring that the extender in proper working order.
- Connect the Ethernet port to the rest of the network, including the modem, PC, and extender.
- Now, from your connected device, open any web browser and, in the address bar, type www.tplinkrepeater.net or 192.168.0.254 and press enter. Alternatively, you can use the 192.168.0.254 address.
- Moreover select your country, time and the language on setup wizard.
- Now it will automatically scan your available list of Wi-Fi in your area.
- Among that list select your main Wi-Fi and enter the password.
- Setup for TP-Link extender successfully done.
Range Extender with WPS Configuration for the TP-Link RE580D
- To begin, remove the TP-Link RE580D extender from its packaging.
- Now connect the antennas to the extender and position them close to the router.
- Check your internet signals here, and if you find that they not consistent, correct the problem.
- After that, connect your extender to an electrical outlet.
- Check the power on both the extender and the router at this point.
- Now press and hold the WPS button on the extender for two minutes, and then press and hold the WPS button on the router for the same amount of time.
- Further, it will begin capturing the settings, and the LED will begin blinking as a result.
- In case you notice that the LED not blinking then place your router somewhere else.
- Finally your TP-Link extender is successfully setup.
Configuration of the TP-Link RE580D Range Extender using the Tether App
- To begin, ensure that your extender is properly connected and that the LED on the extender illuminated.
- Open any play store on your connected device and search for Tether app, which you can then download and install.
- After that, launch the Tether App and enter all of the necessary information about the extender.
- You will now notice a QR code on the extender; simply scan it.
- After that, it will begin capturing the settings.
- Finally, the extender has been configured and is ready to provide network expansion.
Converting the TP-Link RE580D Range Extender to an Access Point mode is simple.
- To begin, open any web browser on your connected device and type www.tplinkrepeater.net or 198.168.0.254 into the address bar of your browser.
- This will then bring you to the login page, where you can enter your administrator username and password before clicking login.
- After that, select Advanced settings wi-fi wireless settings from the drop-down menu.
- After that, look for the mode access point and click on it.
- Finally, you have successfully enabled the Access point mode on your computer.
- It should be applied and your settings saved.
To log into the TP-Link RE580D Range Extender, follow these steps.
- In the first instance, open any web browser on your connected device.
- In the address bar, type www.tplinkrepeater.net or 192.168.0.254 and press Enter to complete your search.
- You will now be redirected to the login page, where you can enter the default credentials, which are admin and username.
- Finally, you were able to log into the settings.
- A range extender from TP-Link, the RE580D. Firmware upgrade via a web-based domain
- To begin, connect your device to a computer and launch any web browser, entering www.tplinkrepeater.net or 192.168.0.254 in the address bar.
- You must now log in using admin as your username and password, and then press enter.
- When you are finished, go to advanced settings and look for any firmware updates; if there are any, simply click on them.
- Further, it will take a few seconds to update the firmware on your computer.
- Finally, your Firmware has been updated, and you are +-*/now able to use the updated firmware that includes bug fixes as well.
The TP-Link RE580D range extender has been reset to factory settings.
- The first step to launch a web browser on the connected device.
- Then type www.tplinkrepeater.net or 192.168.0.254 into the address bar of your browser.
- The login page will now appear; here, enter the administrator’s username and password in the appropriate fields.
- Further, select Advanced Settings and then Factory Reset from the drop-down menu.
- It will only take a few seconds for your extender to begin working with the default settings.
- Last but not least, repeat the procedure for extending the setting.
Wi-Fi TP-Link RE850D AC1900 Range Extender Technology
- Wi-Fi speeds of 1.9Gbps achieved by simultaneously transmitting 600Mbps on 2.4GHz and 1300Mbps on 5GHz.
- Using three dual-band external antennas and two 700mW high-powered amplifiers, you can eliminate “dead zones” and significantly increase your wireless coverage.
- Broadband wireless connections that are both highly targeted and efficient enabled by beamforming technology.
- For wired connections, the 5 Gigabit Ethernet ports provide gigabit-speed connectivity.
- When processing multiple wireless or wired tasks at the same time, a dual-core 1GHz processor ensures that there is no interruption.
- High-Speed mode creates a wireless connection that is lightning-fast for tasks that require a lot of bandwidth.
- The device is compatible with any Wi-Fi router or wireless access point.